This paint is intended for painting over nicotine, soot, and fat stains as well as dry water patches. For the painting of walls and ceilings inside residential rooms, offices, and public buildings. It perfectly isolates colour variations allowing a uniform surface to be obtained. It can be used as priming (insulating and reinforcing) paint or topcoat (protective and decorative) paint on building materials, such as gypsum boards as well as gypsum, cement-based, cement-lime and acrylic plasters, and concrete. It can be used as primer paint under any acrylic/latex paint. It does not contain any hazardous substances.
Paint for stains and smudges
Description
Substrate preparation: The substrate should be dry, non-spalling, crack-, dust-, and wax-free. Remove residual paint, plaster, and layers unbounded with the substrate. For removal of wall fungus, use “Anty-grzyb2” agent. Dry water patch stains, and wipe away stains of soot using coarse-grained abrasive paper. Remove the dust. Cover large chips using filler putty. For freshly applied plaster, it can be painted after a four-week seasoning. In order to reinforce the substrate, apply priming agents, e.g. Primagrunt.
Instructions for use: A ready for use product – do not dilute and mix with other paints and products. Mix carefully just before use. Apply on the substrate using a brush or a roller. Application of two paint layers is recommended. The paint can be coloured using colourants, but always make a colour test with a small amount. Perform your painting job at a temperature above 5°C. Vent the room after application until the odour has gone.
Storage: Store in the original, tight container within temperature range of 5°C to 30°C.
Keep out of the reach of children.
Additional information
Coverage | up to 10 m²/l (one layer) |
---|---|
Capacity | 2,5 L |
Second layer | after approx. 2 h |
Proper drying | 12 h |
Tool cleaning | water with detergent |
Other | contains no solvents, excellent covering |