The set accelerator is an admixture accelerating setting and improving workability. It can be used for concrete, mortar and plaster and cement-based adhesives. The product reduces the use of the batched water, and thus, increases the resistance of ready-made concrete or mortar to destructive frost. It reduces the formation of thermal stresses and cracks and allows successful concreting, bricklaying and plastering at reduced temperatures. The product does not produce blooming. The product is chloride-free and does not cause corrosion of steel.
Set accelerator
Description
Application: Dispense in an amount of 1-2 % by weight in relation to the cement weight (from 250 ml to 500 ml per 25 kg of cement). Mix thoroughly. Perform the process test for a given application before use.
CAUTION! The set accelerator enables concreting in conditions of reduced air temperatures (-10 °C) while maintaining the working conditions in winter conditions, as indicated in ITB instructions No. 282.
Shelf life:. 24 months from the date on the packaging. Date of manufacture is the batch number.
SAFETY PRECAUTIONS: This mixture is not classified as hazardous. General: keep out of reach of children. Prevention: wash hands thoroughly after handling. Wear protective gloves/protective clothing/eye protection/face protection. Reaction: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention.
Storage: Store locked up. Recommended storage temperature: between +5 and +30°C. Disposal: Dispose contents / container in accordance with local and regional regulations.
Special information:
- the manufacturer shall be not responsible for the consequences resulting from the use of the product contrary to its intended purpose
- it is advisable to refer to the current safety data sheet and technical data sheet before handling the product
Additional information
| Capacity | 1 l, 5 l |
|---|---|
| Other | accelerates setting and improves workability, can be used in winter conditions to -10C, does not cause corrosion of steel, for concrete, mortar and plaster and cement-based adhesives, non-chloride product |
