A specialised agent for removing graffiti (spray paints) and fresh stains of other paints from plaster surfaces, front-wall paints, concrete, bricks, and metal. Suitable consistency of the agent allows easy distribution on both smooth and on porous surfaces. The consistency also prevents the agent from dripping down from vertical surfaces.
Graffiti Killer
Description
Instructions for use: Temperature of the cleaned surface should not exceed 40˚C. Apply the agent on the surface using a painting brush or sponge. Allow the agent to activate. Drying time depends on the type of surface and paint to be removed. It can take from 5 to 30 minutes. Scrub with a brush if necessary. Wash off dissolved paint thoroughly with warm water (pressure water cleaning is possible). Repeat cleaning if the paint has not been removed sufficiently.
Do not allow the agent to set dry. Do not allow the surface in the area of application to become over-dry and keep distributing the agent using a painting brush all the time. Important! For both old graffiti and for paint on very porous surfaces, it can be very difficult or even impossible to remove them. The efficiency of the agent depends on the type of dirt. It is much easier to remove fresh dirt than old dirt. After removing dirt, protect the wall using Primacol Graffiti Protect.
Caution! Before using the agent, always make a spot test on an invisible surface to make sure that the agent does not damage the surface. This a very strong agent. Pay due caution when working with Graffiti Killer! When applied on gentle surfaces, it may cause discolouration or damage. Avoid contact with painted or varnished surfaces, such as window frames. The Manufacturer shall not be liable for any damage caused due to any misuse of the agent.
Storage: Store in a dry place, in tight closed original container. Store at a temperature of between 15°and 25°C. Protect from sunlight.
See the packaging for the expiry date.
Additional information
| Capacity | 0,75 L |
|---|---|
| Other | fast-acting, removes graffiti |
