This is facade paint for protection and decoration of building facade. It is characterised by its high covering power and resistance to weather conditions. The paint creates matt and durable coatings that allow wall breathing. It is used for application on cement plasters, cement-lime plasters and other mineral surfaces. It can be dyed to any colour using pigment concentrates for water-soluble outdoor paints.
Exteria facade paint
Description
Surface preparation: The surface should be clean, dry and stable. Dirt, dust, paint residues and peeling-off coatings must be removed. Patch minor spalling. Prime absorptive surfaces. For fresh plasters, wait 3 to 4 weeks prior to application of decorative coatings.
Instructions for use: Mix the paint well before use. Apply with a brush or roller. Apply when the surface and ambient temperature is above 5 °C. Recoat once the previous layer has dried (after about 4 hours). Clean your tools after use with water.
Notes: It is recommended to paint the entire facade or at least its individual sections with paints from the same production batch. Observe drying times between recoating procedures. When the coating is fresh and not protected from weather conditions paint runs may occur and instability of the final coating may result.
Storage: Keep out of the reach of children. Store in the original, tightly closed container within a temperature range of 5 °C to 30 °C. The product is susceptible to freezing weather. See the container for the shelf life.
Additional information
Coverage | up to 9 m²/l (one layer) |
---|---|
Capacity | 3 l, 10 l |
Second layer | after approx. 4 h |
Number of layers | 2 |
Tool cleaning | water |
Other | good covering power, wet scrub resistant |